30W LED Motion Sensor Security Floodlight in Warm White

This is a premium high quality (unlike others on the market that are budget versions) low energy ultra slimline SMD LED PIR motion sensor outdoor floodlight. This LED floodlight gives a bright Warm White light. These LED floodlights are also instantly bright with no warm up time just like a standard halogen floodlight.

This floodlight produces 2550 Lumens of light (the higher the lumens the brighter a light).

Premium Quality Aluminium Alloy body
Corrosion Resistant
Built in Power supply, No external ballast required
No Flickering
No UV Radiation
High Quality LED Chip
High Quality Power Driver
Widely used for Lighting Driveways,Gardens & Buildings, Commercial Bill,Boards & Hoardings, Plazas,Sports Grounds & Parking Lots
Detection Range 120 Degrees.
Detection Distance of 2-8M.
Time Delay Мin. 12sec ±3sec; Max. 6min ±2min.

Specifications:

Fitting Colour: White
Fitting Material: Premium Quality Diecast Aluminium
LED Emitter: SMD LED (SMD 2835)
Dimensions: 231mm (L), 217mm (H)
Light Colour: Warm White (3000K / 830)
Voltage: 220-240V (50/60Hz)
Lumens: 2550LM
Beam Angle: 100°
Working Temperature: -20° to 45° C
Power Consumption: 30 Watt (150W Halogen Floodlight Equiv - others advertise 2550 lumens or less lamps as 300W)
Power Factor: >90
IP Rating: IP44
Average Life: 20,000 Hours
Weight: Kg
Safety Approved: CE / RoHS
Guarantee: 2 Year Manufactures Guarantee
Product Code: VT-4933 / 5822

No UV or IR Radiation

Please click here for the product brochure.

These 30W Motion Sensor VT-4933 / 5822 LED floodlights come with 15cm of cable fitted to the fitting and do not have an overide function so will only turn on when motion is detected.

We strongly advise that any electrical work be carried out by a qualified electrician.

If you require a cable connector to add this floodlight to an existing cable or to lengthen the current cable we recommend the following: Please Click Here.

All our LED floodlight range are factory sealed units and as such should not be opened as they do not contain any user replaceable components. Any attempt to open the units will void the warranty / guarantee.

NOTE – To comply with regulations, installation must be carried out by a suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/maintenance engineer for future reference.